4.0A Intelligent Battery Charger

Fully-automatic charging made easy

Our Intelligent Charger features internal circuitry which detects the battery type, current battery charge, overall battery condition, and automatically responds to optimize charging for that specific battery. With winter and battery reconditioning modes, this is the best compact charger out there. Intelligent Battery Charger is perfect for maintaining and restoring your battery especially when it will not be used for an extended time. Such applications include: ATVs, snowmobiles, motorcycles, watercraft (boats, jetski, etc.), trailers, RVs, ride-on lawnmowers, tractors, classic cars, auxiliary batteries, back-up power supply, solar battery, and more. AC cord length measures 6'l, DC cord measures 6'l. Maximum output of 4 amps and minimum of 1 amp.

The new Winter Mode helps to maintain the battery when the temperature drops below 41°F (5°C).

• 9-Stage Charger
• Primary Evaluation (Diagnostic), Recovery, Soft Start, Pulse, Reconditioning, Bulk Charge, Absorption Charge, Evaluation (Diagnostic), and Maintenance Charge. What does that mean in simple terms?
• Primary Evaluation is the first stage in which the charger runs a diagnostic test on the battery's condition, charge, and overall health.
• Recovery charge is the second stage where the charger will begin to restore a deeply discharged battery. This step is skipped if the battery does not require it.
• To protect the battery and optimize charging, the Soft Start action is applied - a slow charge current is applied to the battery then ramps up.
• The Pulse Cycle is initiated to help "knock off" sulfation build-up on the plates that may be inhibiting the battery's ability to reach full capacity.
• The Reconditioning Cycle helps to prepare the battery for bulk charging and finalizes the recovery charge.
• Bulk Charging is the first stage in which the charger identifies the battery and its needs, then applies a high voltage/amperage charge to do the bulk of the charging.
• Absorption Charging is when the battery has reached ~80% of its capacity and begins to lower the input current to the battery. This is sometimes known as the "cool-down" cycle.
• Evaluation Diagnostic is the last diagnostic mode to ensure the battery is at its optimal health.
• The final cycle is known as the Maintenance Charge (also known as "trickle" or "Float" charge). In this stage, the battery has already reached 95%; the battery charger will continue to apply a steady current until the battery reaches 100% capacity - at that time, the charger will continue to monitor the battery and apply a charge if it detects any loss.

You may ask if you even need a battery charger if your battery is healthy, and the answer is Yes! Our intelligent battery charger helps to maintain your battery and keep it in optimal operating condition which saves you money in the long run. Batteries need to be maintained at 100% capacity for maximum battery life!

Quick List of Features:
Intelligent Battery Management
9-Stage Charger
Winter Charging Mode
Fully- Automatic Charging
For all* 6V & 12V Batteries (including LiFePo4)
Compact Size

• For Battery Types: Lithium iron-phosphate (LiFePo4), LPF, SLA, AGM, Maintenance Free, Flooded, Wet Cell, VRLA, Gel, Lead-Acid, Vented, Deep Cycle
• Microprocessor Controlled
• Input Voltage: 100-140V AC
• Input Current: 0.9A
• Output Voltage: 6V or 12V (nominal)
• Output Current: 4A (High), 1A (Low)
• AC Cord Length: 6ft.
• DC Cord Length: 6ft.
• Protections: Short Circuit, Reverse Polarity
• 9-Stage Charger: Primary Evaluation (Diagnostic), Recovery, Soft Start, Pulse, Reconditioning, Bulk Charge, Absorption Charge, Evaluation (Diagnostic), Maintenance Charge
• Winter Charging Mode
• Certifications: CE, BC
• Operating Temperature: 34°F - 140°F (1°C - 60°C)
• Storage Temperature: 34°F - 140°F (1°C - 60°C)
• Unit Size: 7.3 x 3.3 x 1.7 (inches)
• Package Size: 9.8 x 5.5 x 2.1 (inches)
• Weight: 1.2 lbs.