Screw Extractor Set

The easy way to remove stripped screws

Remove stubborn screws that have damaged or stripped-out heads with our Screw Extractor Set. Just place an Extractor in your 3/8” reversible drill, first using the burnishing end to clean the screw recess. Then reverse the bit in your drill and use the special reverse-threaded end to bite into the screw head and quickly remove it. Set of four, different size Extractors will remove most wood screws, drywall screws, machine screws and bolts up to 2” long with Phillips, Torx, Hex (Allen), and square-drive heads. Precision engineered from hardened tool steel for multiple extractions and maximum performance; includes convenient storage case.

• Reverse thread design with dual tips quickly remove stripped or broken screws and broken off bolts without damaging surrounding area
• Upgraded quality M2 6542 tungsten alloy is harder than most extractors, allowing removal of far more fasteners including stainless, hardened steel and brass up to 12.9 tensile strength
• 1/4 in. and 5/16 in. hex shank screw extractors work with any adjustable chuck drill
• Designed to drill out and remove even the most stubborn stripped, damaged, embedded, rusted or painted-over screws and bolts
• Quick and easy operation: determine the proper size bit to use, and drill a hole with the fluted cutting end. Flip the bit to the tapered threaded end, and slowly reverse the damaged fastener out
• Sizes included work with the following size damaged fasteners: #1 (#4-7 screws; #10/5mm bolts), #2 (#8-10 screws; 1/4 in./6mm bolts), #3 (#11-14 screws; 5/16 in./8mm bolts), #4 (16-24 screws; 3/8 in./10/ bolts)